Propane is the most common form of liquefied petroleum gas (LPG)
that can be used as a fuel in areas where no gas mains are installed. A
byproduct of the oil refining process, it is compressed into a liquid for
ease of storage and delivery. In a domestic storage tank, fuel vaporizes
in the upper part of the vessel which can be tapped for use as a cooking
and heating gas. Its pressure is regulated down to a level compatible with
the appliances it runs. In cold climates, the ambient temperature is sometimes
too low for the propane to vaporize fast enough, in which case a heat source,
known as a vaporizer must be used. In its natural form, Propane has no
smell and an odorant is added before distribution, for safety reasons.
The propane industry uses many different types and sizes of tanks,
from 30,000 or more gallons at the distributor, to a 2 gallon backyard
barbecue cylinder. Our propane tanks are built to 250# working pressure.
Under normal circumstances, the vapor pressure at 100 f is 172 psi.
We manufactures the following types of LPG tanks:
Bulk storage Up to 90,000 gallons
Dispensers (Used to store and transfer liquid propane into smaller
tanks) 250 to 6,000 gallons, horizontal or vertical.
Domestic 124 to 2,000 gallons.
Motor fuel 60 to 250 gallons (Primary or alternate fuel system tanks
for autos, trucks, buses.)
Standby fuel 124 to 5,000 gallons. (Back up fuel for remotely located
generators, i.e. microwave relay stations)
Underground storage 500 to 5,000 gallons.
DOT tanks 124 to 3,000 gallons (For the transportation of liquid
propane on a truck or trailer. Dismountable or permanently installed.)
Top of Page